Intelligent High Speed CNC Drill
HIGH SPEED ROBODRILL
α-T14iF / α-T21iF
• 54m/min and acceleration over 1,5 G
• Velocidade de corte 30.000 mm/min
• 24.000 RPM
• Leitura de 1000 blocos à frente
• Tool changing time of 1,6s (cut/cut)
• Controle de dilatação térmica nos 3 eixos e no spindle
• Precisão de posicionamento 0.006/300 mm
• Repetibilidade de posicionamento 0,002 mm
• CNC screens in portuguese
Possibilidade de vários opcionais para melhoria de desempenho:
NURBS, Interpolações, Nano Smoothing, Monitoramento da vida útil da ferramenta, Controle modelador
The strongest BT30
"X" axis travel
300, 500 or 700mm
"Y" axis travel
300 or 400mm
"Z" axis travel
330mm
|
 |
|
Intelligent High Speed CNC Drill
HIGH TORQUE ROBODRILL
α-T14iF / α-T21iF
• 54m/min and acceleration over 1,5 G
• 10.000 or 24.000 RPM
• Tool changing time of 1,6s (cut/cut)
• Controle de dilatação térmica nos 3 eixos e no spindle
• Precisão de posicionamento 0.006/300 mm
• Repetibilidade de posicionamento 0,002 mm
• CNC screens in portuguese
The strongest BT30
"X" axis travel
300, 500 or 700mm
"Y" axis travel
300 or 400mm
"Z" axis travel
330mm
|
|
|
Intelligent High Speed CNC Drill
ROBODRILL α-T14iF / α-T21iF
• 54m/min and acceleration over 1,5 G
• 10.000 or 24.000 RPM
• Tool changing time of 1,6s (cut/cut)
• Controle de dilatação térmica nos 3 eixos e no spindle
• Precisão de posicionamento 0.006/300 mm
• Repetibilidade de posicionamento 0,002 mm
• CNC screens in portuguese
The strongest BT30
Machining performance:
injected aluminum - 600 c³/min / steel (SAE 1020) - 100 c³/min
"X" axis travel
300, 500 or 700mm
"Y" axis travel
300 or 400mm
"Z" axis travel
330mm
|
|
|
Rotative Table FANUC
Robodrill DDR 260i
• Additional 1-axis indexing system with synchronous built-in servo motor and αiCZ sensor
• Hollow shaft for clumping devices.(55mm inside diam.)
• Max.speed 200min-1. Approx. 0.3 seconds to index opposite direction
• Direct drive and backlash-less structure enables high speed and high accuracy machining
|
 |
|
Wire-cut 5th axis
ROBOCUT α-0iD / α-1iD
• Automatic wire feed in 10s (spark-spark)
• Surface roughness of 0,07µmRa
• Milesimal cutting precision
• Anti-electrolysis system
• CNC screens in portuguese
Max. workpice dimensions
700x600x250 or 1050x820x300
Max. workpiece mass
500Kg or 1000Kg
Axis travels
370x270x255mm or 600x400x310mm
Warranty until 2 years
|
 |
|
Robotics
O mais vendido robô do mundo.
A Mitsui Motion Máquinas está preparada para fornecer a integração de robótica com as máquinas Fanuc. |
 |
|
